AWS EC2 (ap-southeast-2) (Amazon EC2) - 2 vCPUs - 4GB Yab
August 21st 2023
This is the yab (yabs.sh results) for tests that were run on a AWS EC2 (ap-southeast-2) (Amazon EC2) server on August 21st 2023.
yabs.sh is an easy to run and powerful script that runs a full set of benchmarks on your server. Get Started with Yabs. You can collect, organize and visualize your yabs for free at VPSBenchmarks.
Go to your Dashboard to manage your yabs.
Compare Geekbench, Fio and Iperf3 benchmark results from the Yabs comparison page.
Server
| Provider | AWS EC2 (ap-southeast-2) (Amazon EC2) |
|---|---|
| VPS Plan | 2 vCPUs - 4GB |
| OS Version | Ubuntu 22.04.2 LTS |
| Data Center Location | Sydney, New South Wales, Australia |
Specs
| Processor | AMD EPYC 7571 |
|---|---|
| CPU cores | 2 @ 2200.000 MHz |
| RAM | 3.8 GiB |
| Disk | 8.0 GB |
| Swap | 0.0 B |
| Kernel | 5.19.0-1025-aws |
| AES-NI | ✔ Enabled |
| VM-x/AMD-V | ❌ Disabled |
| VM Type |
Raw Yabs.sh Output
{
"version": "v2023-04-23",
"time": "20230821-191453",
"os": {
"arch": "x64",
"distro": "Ubuntu 22.04.2 LTS",
"kernel": "5.19.0-1025-aws",
"uptime": 67.04,
"vm": "AMAZON"
},
"net": {
"ipv4": true,
"ipv6": false
},
"cpu": {
"model": "AMD EPYC 7571",
"cores": 2,
"freq": "2200.000 MHz",
"aes": true,
"virt": false
},
"mem": {
"ram": 3968564,
"ram_units": "KiB",
"swap": 0,
"swap_units": "KiB",
"disk": 8048434,
"disk_units": "KB"
},
"ip_info": {
"protocol": "IPv4",
"isp": "Amazon.com, Inc.",
"asn": "AS16509 Amazon.com, Inc.",
"org": "AWS EC2 (ap-southeast-2)",
"city": "Sydney",
"region": "New South Wales",
"region_code": "NSW",
"country": "Australia"
},
"fio": [
{
"bs": "4k",
"speed_r": 5850,
"iops_r": 1462,
"speed_w": 5852,
"iops_w": 1463,
"speed_rw": 11702,
"iops_rw": 2925,
"speed_units": "KBps"
},
{
"bs": "64k",
"speed_r": 67597,
"iops_r": 1056,
"speed_w": 67955,
"iops_w": 1061,
"speed_rw": 135552,
"iops_rw": 2117,
"speed_units": "KBps"
},
{
"bs": "512k",
"speed_r": 64371,
"iops_r": 125,
"speed_w": 67237,
"iops_w": 131,
"speed_rw": 131608,
"iops_rw": 256,
"speed_units": "KBps"
},
{
"bs": "1m",
"speed_r": 62103,
"iops_r": 60,
"speed_w": 66529,
"iops_w": 64,
"speed_rw": 128632,
"iops_rw": 124,
"speed_units": "KBps"
}
],
"iperf": [
{
"mode": "IPv4",
"provider": "Clouvider",
"loc": "London, UK (10G)",
"send": "13.9 Mbits/sec",
"recv": "19.5 Mbits/sec",
"latency": "260 ms"
},
{
"mode": "IPv4",
"provider": "Scaleway",
"loc": "Paris, FR (10G)",
"send": "busy ",
"recv": "busy ",
"latency": "276 ms"
},
{
"mode": "IPv4",
"provider": "NovoServe",
"loc": "North Holland, NL (40G)",
"send": "585 Mbits/sec",
"recv": "busy ",
"latency": "262 ms"
},
{
"mode": "IPv4",
"provider": "Uztelecom",
"loc": "Tashkent, UZ (10G)",
"send": "842 Mbits/sec",
"recv": "406 Mbits/sec",
"latency": "216 ms"
},
{
"mode": "IPv4",
"provider": "Clouvider",
"loc": "NYC, NY, US (10G)",
"send": "busy ",
"recv": "6.85 Mbits/sec",
"latency": "261 ms"
},
{
"mode": "IPv4",
"provider": "Clouvider",
"loc": "Dallas, TX, US (10G)",
"send": "busy ",
"recv": "busy ",
"latency": "232 ms"
},
{
"mode": "IPv4",
"provider": "Clouvider",
"loc": "Los Angeles, CA, US (10G)",
"send": "18.8 Mbits/sec",
"recv": "26.9 Mbits/sec",
"latency": "202 ms"
}
],
"geekbench": [
{
"version": 6,
"single": 677,
"multi": 933,
"url": "https://browser.geekbench.com/v6/cpu/2343128"
}
],
"runtime": {
"start": 1692645293,
"end": 1692646595,
"elapsed": 1302
}
}
Results Summary
The scale in the charts between 0 and 100 represents the performance of this server for each metric relative to the performance of all other servers tested recently at VPSBenchmarks for that same metric.
- 100 means the server is the fastest for this metric.
- 50 means the server has exactly median performance for this metric.
- 0 means the server is the slowest for this metric.
Geekbench 6
Geekbench measures your processor's single-core and multi-core power.
| Full Test | https://browser.geekbench.com/v6/cpu/2343128 |
|---|---|
| Multi Core | 933 |
| Single Core | 677 |
Fio
This Fio test evaluates disk performance in 4 random read and write runs with different block sizes, 50% reads and 50% writes.
All fio tests below run in asynchronous direct mode using libaio and use 2 execution threads regardless of the size of the server.
| 4k | 64k | 512k | 1m | |
|---|---|---|---|---|
| Read | 5.9 MB/s 1.462k IOPS | 67.6 MB/s 1.056k IOPS | 64.4 MB/s 0.125k IOPS | 62.1 MB/s 0.06k IOPS |
| Write | 5.9 MB/s 1.463k IOPS | 68.0 MB/s 1.061k IOPS | 67.2 MB/s 0.131k IOPS | 66.5 MB/s 0.064k IOPS |
| Total | 11.7 MB/s 2.925k IOPS | 135.6 MB/s 2.117k IOPS | 131.6 MB/s 0.256k IOPS | 128.6 MB/s 0.124k IOPS |
Iperf3 ipv4
Iperf3 tests download and upload speeds to various locations using 8 parallel threads.
| Download | Upload | |
|---|---|---|
|
Scaleway Paris, FR (10G) |
busy | busy |
|
Clouvider London, UK (10G) |
20 Mbits/sec | 14 Mbits/sec |
|
Clouvider NYC, NY, US (10G) |
7 Mbits/sec | busy |
|
Uztelecom Tashkent, UZ (10G) |
406 Mbits/sec | 842 Mbits/sec |
|
Clouvider Dallas, TX, US (10G) |
busy | busy |
|
NovoServe North Holland, NL (40G) |
busy | 585 Mbits/sec |
|
Clouvider Los Angeles, CA, US (10G) |
27 Mbits/sec | 19 Mbits/sec |