Contabo - VPS 1 SSD Yab
October 2nd 2025
This is the yab (yabs.sh results) for tests that were run on a Contabo server on October 2nd 2025.
yabs.sh is an easy to run and powerful script that runs a full set of benchmarks on your server. Get Started with Yabs. You can collect, organize and visualize your yabs for free at VPSBenchmarks.
Go to your Dashboard to manage your yabs.
Compare Geekbench, Fio and Iperf3 benchmark results from the Yabs comparison page.
Server
| Provider | Contabo |
|---|---|
| VPS Plan | VPS 1 SSD |
| OS Version | Ubuntu 24.04.3 LTS |
| Data Center Location | Sydney, New South Wales, Australia |
Specs
| Processor | AMD EPYC Processor (with IBPB) |
|---|---|
| CPU cores | 4 @ 2794.748 MHz |
| RAM | 5.8 GiB |
| Disk | 609.4 GB |
| Swap | 0.0 B |
| Kernel | 6.8.0-71-generic |
| AES-NI | ✔ Enabled |
| VM-x/AMD-V | ❌ Disabled |
| VM Type |
Raw Yabs.sh Output
{
"version": "v2025-04-20",
"time": "20251002-130415",
"os": {
"arch": "x64",
"distro": "Ubuntu 24.04.3 LTS",
"kernel": "6.8.0-71-generic",
"uptime": 78117.36,
"vm": "KVM"
},
"net": {
"ipv4": true,
"ipv6": false
},
"cpu": {
"model": "AMD EPYC Processor (with IBPB)",
"cores": 4,
"freq": "2794.748 MHz",
"aes": true,
"virt": false
},
"mem": {
"ram": 6067512,
"ram_units": "KiB",
"swap": 0,
"swap_units": "KiB",
"disk": 609353924,
"disk_units": "KB"
},
"ip_info": {
"protocol": "IPv4",
"isp": "Contabo Asia Private Limited",
"asn": "AS141995 Contabo Asia Private Limited",
"org": "Contabo GmbH",
"city": "Sydney",
"region": "New South Wales",
"region_code": "NSW",
"country": "Australia"
},
"partition": "/dev/sda1",
"fio": [
{
"bs": "4k",
"speed_r": 47832,
"iops_r": 11958,
"speed_w": 47873,
"iops_w": 11968,
"speed_rw": 95705,
"iops_rw": 23926,
"speed_units": "KBps"
},
{
"bs": "64k",
"speed_r": 109901,
"iops_r": 1717,
"speed_w": 110480,
"iops_w": 1726,
"speed_rw": 220381,
"iops_rw": 3443,
"speed_units": "KBps"
},
{
"bs": "512k",
"speed_r": 99231,
"iops_r": 193,
"speed_w": 104504,
"iops_w": 204,
"speed_rw": 203735,
"iops_rw": 397,
"speed_units": "KBps"
},
{
"bs": "1m",
"speed_r": 98628,
"iops_r": 96,
"speed_w": 105196,
"iops_w": 102,
"speed_rw": 203824,
"iops_rw": 198,
"speed_units": "KBps"
}
],
"iperf": [
{
"mode": "IPv4",
"provider": "Clouvider",
"loc": "London, UK (10G)",
"send": "151 Mbits/sec",
"recv": "174 Mbits/sec",
"latency": "--"
},
{
"mode": "IPv4",
"provider": "Eranium",
"loc": "Amsterdam, NL (100G)",
"send": "busy ",
"recv": "busy ",
"latency": "--"
},
{
"mode": "IPv4",
"provider": "Uztelecom",
"loc": "Tashkent, UZ (10G)",
"send": "120 Mbits/sec",
"recv": "177 Mbits/sec",
"latency": "--"
},
{
"mode": "IPv4",
"provider": "Leaseweb",
"loc": "Singapore, SG (10G)",
"send": "180 Mbits/sec",
"recv": "193 Mbits/sec",
"latency": "--"
},
{
"mode": "IPv4",
"provider": "Clouvider",
"loc": "Los Angeles, CA, US (10G)",
"send": "169 Mbits/sec",
"recv": "180 Mbits/sec",
"latency": "--"
},
{
"mode": "IPv4",
"provider": "Leaseweb",
"loc": "NYC, NY, US (10G)",
"send": "157 Mbits/sec",
"recv": "166 Mbits/sec",
"latency": "--"
},
{
"mode": "IPv4",
"provider": "Edgoo",
"loc": "Sao Paulo, BR (1G)",
"send": "busy ",
"recv": "149 Mbits/sec",
"latency": "--"
}
],
"geekbench": [
{
"version": 6,
"single": 1062,
"multi": 3190,
"url": "https://browser.geekbench.com/v6/cpu/14214077"
}
],
"runtime": {
"start": 1759403055,
"end": 1759403949,
"elapsed": 894
}
}
Results Summary
The scale in the charts between 0 and 100 represents the performance of this server for each metric relative to the performance of all other servers tested recently at VPSBenchmarks for that same metric.
- 100 means the server is the fastest for this metric.
- 50 means the server has exactly median performance for this metric.
- 0 means the server is the slowest for this metric.
Geekbench 6
Geekbench measures your processor's single-core and multi-core power.
| Full Test | https://browser.geekbench.com/v6/cpu/14214077 |
|---|---|
| Multi Core | 3190 |
| Single Core | 1062 |
Fio
This Fio test evaluates disk performance in 4 random read and write runs with different block sizes, 50% reads and 50% writes.
All fio tests below run in asynchronous direct mode using libaio and use 2 execution threads regardless of the size of the server.
| 4k | 64k | 512k | 1m | |
|---|---|---|---|---|
| Read | 47.8 MB/s 11.958k IOPS | 109.9 MB/s 1.717k IOPS | 99.2 MB/s 0.193k IOPS | 98.6 MB/s 0.096k IOPS |
| Write | 47.9 MB/s 11.968k IOPS | 110.5 MB/s 1.726k IOPS | 104.5 MB/s 0.204k IOPS | 105.2 MB/s 0.102k IOPS |
| Total | 95.7 MB/s 23.926k IOPS | 220.4 MB/s 3.443k IOPS | 203.7 MB/s 0.397k IOPS | 203.8 MB/s 0.198k IOPS |
Iperf3 ipv4
Iperf3 tests download and upload speeds to various locations using 8 parallel threads.
| Download | Upload | |
|---|---|---|
|
Edgoo Sao Paulo, BR (1G) |
149 Mbits/sec | busy |
|
Clouvider London, UK (10G) |
174 Mbits/sec | 151 Mbits/sec |
|
Leaseweb NYC, NY, US (10G) |
166 Mbits/sec | 157 Mbits/sec |
|
Eranium Amsterdam, NL (100G) |
busy | busy |
|
Leaseweb Singapore, SG (10G) |
193 Mbits/sec | 180 Mbits/sec |
|
Uztelecom Tashkent, UZ (10G) |
177 Mbits/sec | 120 Mbits/sec |
|
Clouvider Los Angeles, CA, US (10G) |
180 Mbits/sec | 169 Mbits/sec |