Strato (IONOS) - VC 1-2 Yab
September 25th 2025
This is the yab (yabs.sh results) for tests that were run on a Strato (IONOS) server on September 25th 2025.
yabs.sh is an easy to run and powerful script that runs a full set of benchmarks on your server. Get Started with Yabs. You can collect, organize and visualize your yabs for free at VPSBenchmarks.
Go to your Dashboard to manage your yabs.
Compare Geekbench, Fio and Iperf3 benchmark results from the Yabs comparison page.
IONOS Coupons
Link: https://www.ionos.com/cloud/cloud-servers#packages?ac=OM.US.USt17K419101T7073a
Value: $100
New Cloud Server customers get a credit of up to $100 applied to their first month’s bill. The credit is valid for 1 month and any unused credit expires following the first invoice.
Server
| Provider | Strato (IONOS) |
|---|---|
| VPS Plan | VC 1-2 |
| OS Version | Ubuntu 24.04.3 LTS |
| Data Center Location | Berlin, State of Berlin, Germany |
Specs
| Processor | AMD EPYC-Milan Processor |
|---|---|
| CPU cores | 1 @ 1996.249 MHz |
| RAM | 1.8 GiB |
| Disk | 60.9 GB |
| Swap | 0.0 B |
| Kernel | 6.8.0-64-generic |
| AES-NI | ✔ Enabled |
| VM-x/AMD-V | ✔ Enabled |
| VM Type |
Raw Yabs.sh Output
{
"version": "v2025-04-20",
"time": "20250925-051456",
"os": {
"arch": "x64",
"distro": "Ubuntu 24.04.3 LTS",
"kernel": "6.8.0-64-generic",
"uptime": 5263896.92,
"vm": "MICROSOFT"
},
"net": {
"ipv4": true,
"ipv6": true
},
"cpu": {
"model": "AMD EPYC-Milan Processor",
"cores": 1,
"freq": "1996.249 MHz",
"aes": true,
"virt": true
},
"mem": {
"ram": 1899716,
"ram_units": "KiB",
"swap": 0,
"swap_units": "KiB",
"disk": 60857304,
"disk_units": "KB"
},
"ip_info": {
"protocol": "IPv6",
"isp": "IONOS SE",
"asn": "AS8560 IONOS SE",
"org": "Strato GmbH",
"city": "Berlin",
"region": "State of Berlin",
"region_code": "BE",
"country": "Germany"
},
"partition": "/dev/vda1",
"fio": [
{
"bs": "4k",
"speed_r": 80045,
"iops_r": 20011,
"speed_w": 80256,
"iops_w": 20064,
"speed_rw": 160301,
"iops_rw": 40075,
"speed_units": "KBps"
},
{
"bs": "64k",
"speed_r": 492848,
"iops_r": 7700,
"speed_w": 495442,
"iops_w": 7741,
"speed_rw": 988290,
"iops_rw": 15441,
"speed_units": "KBps"
},
{
"bs": "512k",
"speed_r": 474426,
"iops_r": 926,
"speed_w": 499633,
"iops_w": 975,
"speed_rw": 974059,
"iops_rw": 1901,
"speed_units": "KBps"
},
{
"bs": "1m",
"speed_r": 468289,
"iops_r": 457,
"speed_w": 499477,
"iops_w": 487,
"speed_rw": 967766,
"iops_rw": 944,
"speed_units": "KBps"
}
],
"iperf": [
{
"mode": "IPv4",
"provider": "Clouvider",
"loc": "London, UK (10G)",
"send": "1.75 Gbits/sec",
"recv": "3.41 Gbits/sec",
"latency": "19.8 ms"
},
{
"mode": "IPv4",
"provider": "Eranium",
"loc": "Amsterdam, NL (100G)",
"send": "busy ",
"recv": "busy ",
"latency": "38.9 ms"
},
{
"mode": "IPv4",
"provider": "Uztelecom",
"loc": "Tashkent, UZ (10G)",
"send": "1.74 Gbits/sec",
"recv": "2.02 Gbits/sec",
"latency": "90.9 ms"
},
{
"mode": "IPv4",
"provider": "Leaseweb",
"loc": "Singapore, SG (10G)",
"send": "987 Mbits/sec",
"recv": "757 Mbits/sec",
"latency": "168 ms"
},
{
"mode": "IPv4",
"provider": "Clouvider",
"loc": "Los Angeles, CA, US (10G)",
"send": "970 Mbits/sec",
"recv": "991 Mbits/sec",
"latency": "172 ms"
},
{
"mode": "IPv4",
"provider": "Leaseweb",
"loc": "NYC, NY, US (10G)",
"send": "1.67 Gbits/sec",
"recv": "2.49 Gbits/sec",
"latency": "90.5 ms"
},
{
"mode": "IPv4",
"provider": "Edgoo",
"loc": "Sao Paulo, BR (1G)",
"send": "46.8 Mbits/sec",
"recv": "30.4 Mbits/sec",
"latency": "332 ms"
},
{
"mode": "IPv6",
"provider": "Clouvider",
"loc": "London, UK (10G)",
"send": "1.84 Gbits/sec",
"recv": "4.72 Gbits/sec",
"latency": "19.6 ms"
},
{
"mode": "IPv6",
"provider": "Eranium",
"loc": "Amsterdam, NL (100G)",
"send": "1.81 Gbits/sec",
"recv": "6.24 Gbits/sec",
"latency": "34.4 ms"
},
{
"mode": "IPv6",
"provider": "Uztelecom",
"loc": "Tashkent, UZ (10G)",
"send": "1.74 Gbits/sec",
"recv": "2.10 Gbits/sec",
"latency": "90.6 ms"
},
{
"mode": "IPv6",
"provider": "Leaseweb",
"loc": "Singapore, SG (10G)",
"send": "1.00 Gbits/sec",
"recv": "1.13 Gbits/sec",
"latency": "163 ms"
},
{
"mode": "IPv6",
"provider": "Clouvider",
"loc": "Los Angeles, CA, US (10G)",
"send": "917 Mbits/sec",
"recv": "254 Mbits/sec",
"latency": "172 ms"
},
{
"mode": "IPv6",
"provider": "Leaseweb",
"loc": "NYC, NY, US (10G)",
"send": "1.72 Gbits/sec",
"recv": "394 Mbits/sec",
"latency": "89.9 ms"
},
{
"mode": "IPv6",
"provider": "Edgoo",
"loc": "Sao Paulo, BR (1G)",
"send": "393 Mbits/sec",
"recv": "86.4 Mbits/sec",
"latency": "326 ms"
}
],
"geekbench": [
{
"version": 6,
"single": 1188,
"multi": 1189,
"url": "https://browser.geekbench.com/v6/cpu/14054490"
}
],
"runtime": {
"start": 1758777296,
"end": 1758778325,
"elapsed": 1029
}
}
Results Summary
The scale in the charts between 0 and 100 represents the performance of this server for each metric relative to the performance of all other servers tested recently at VPSBenchmarks for that same metric.
- 100 means the server is the fastest for this metric.
- 50 means the server has exactly median performance for this metric.
- 0 means the server is the slowest for this metric.
Geekbench 6
Geekbench measures your processor's single-core and multi-core power.
| Full Test | https://browser.geekbench.com/v6/cpu/14054490 |
|---|---|
| Multi Core | 1189 |
| Single Core | 1188 |
Fio
This Fio test evaluates disk performance in 4 random read and write runs with different block sizes, 50% reads and 50% writes.
All fio tests below run in asynchronous direct mode using libaio and use 2 execution threads regardless of the size of the server.
| 4k | 64k | 512k | 1m | |
|---|---|---|---|---|
| Read | 80.0 MB/s 20.011k IOPS | 492.8 MB/s 7.7k IOPS | 474.4 MB/s 0.926k IOPS | 468.3 MB/s 0.457k IOPS |
| Write | 80.3 MB/s 20.064k IOPS | 495.4 MB/s 7.741k IOPS | 499.6 MB/s 0.975k IOPS | 499.5 MB/s 0.487k IOPS |
| Total | 160.3 MB/s 40.075k IOPS | 988.3 MB/s 15.441k IOPS | 974.1 MB/s 1.901k IOPS | 967.8 MB/s 0.944k IOPS |
Iperf3 ipv4
Iperf3 tests download and upload speeds to various locations using 8 parallel threads.
| Download | Upload | |
|---|---|---|
|
Edgoo Sao Paulo, BR (1G) |
30 Mbits/sec | 47 Mbits/sec |
|
Clouvider London, UK (10G) |
3492 Mbits/sec | 1792 Mbits/sec |
|
Leaseweb NYC, NY, US (10G) |
2550 Mbits/sec | 1710 Mbits/sec |
|
Eranium Amsterdam, NL (100G) |
busy | busy |
|
Leaseweb Singapore, SG (10G) |
757 Mbits/sec | 987 Mbits/sec |
|
Uztelecom Tashkent, UZ (10G) |
2068 Mbits/sec | 1782 Mbits/sec |
|
Clouvider Los Angeles, CA, US (10G) |
991 Mbits/sec | 970 Mbits/sec |
Iperf3 ipv6
Iperf3 tests download and upload speeds to various locations using 8 parallel threads.
| Download | Upload | |
|---|---|---|
|
Edgoo Sao Paulo, BR (1G) |
86 Mbits/sec | 393 Mbits/sec |
|
Clouvider London, UK (10G) |
4833 Mbits/sec | 1884 Mbits/sec |
|
Leaseweb NYC, NY, US (10G) |
394 Mbits/sec | 1761 Mbits/sec |
|
Eranium Amsterdam, NL (100G) |
6390 Mbits/sec | 1853 Mbits/sec |
|
Leaseweb Singapore, SG (10G) |
1157 Mbits/sec | 1024 Mbits/sec |
|
Uztelecom Tashkent, UZ (10G) |
2150 Mbits/sec | 1782 Mbits/sec |
|
Clouvider Los Angeles, CA, US (10G) |
254 Mbits/sec | 917 Mbits/sec |