This is the yab (yabs.sh results) for tests that were run on a Reliance Jio Infocomm Limited server on March 8th 2026.
yabs.sh is an easy to run and powerful script that runs a full set of benchmarks on your server. Get Started with Yabs. You can collect, organize and visualize your yabs for free at VPSBenchmarks.
Go to your Dashboard to manage your yabs.
Compare Geekbench, Fio and Iperf3 benchmark results from the Yabs comparison page.
| Provider | Reliance Jio Infocomm Limited |
|---|---|
| VPS Plan | Local Asus Laptop i3-7020U |
| OS Version | Ubuntu 22.04.5 LTS |
| Data Center Location | Panipat, Haryana, India |
| Processor | Intel(R) Core(TM) i3-7020U CPU @ 2.30GHz |
|---|---|
| CPU cores | 1 @ 2304.004 MHz |
| RAM | 7.7 GiB |
| Disk | 50.6 GB |
| Swap | 0.0 B |
| Kernel | 6.8.0-101-generic |
| AES-NI | ✔ Enabled |
| VM-x/AMD-V | ✔ Enabled |
| VM Type |
{
"version": "v2025-04-20",
"time": "20260308-123232",
"os": {
"arch": "x64",
"distro": "Ubuntu 22.04.5 LTS",
"kernel": "6.8.0-101-generic",
"uptime": 237.44,
"vm": "DOCKER"
},
"net": {
"ipv4": true,
"ipv6": false
},
"cpu": {
"model": "Intel(R) Core(TM) i3-7020U CPU @ 2.30GHz",
"cores": 1,
"freq": "2304.004 MHz",
"aes": true,
"virt": true
},
"mem": {
"ram": 8062676,
"ram_units": "KiB",
"swap": 0,
"swap_units": "KiB",
"disk": 50644856,
"disk_units": "KB"
},
"ip_info": {
"protocol": "IPv4",
"isp": "Reliance Jio Infocomm Limited",
"asn": "AS55836 Reliance Jio Infocomm Limited",
"org": "Reliance Jio Infocomm Limited",
"city": "Panipat",
"region": "Haryana",
"region_code": "HR",
"country": "India"
},
"partition": "overlay",
"fio": [
{
"bs": "4k",
"speed_r": 5015,
"iops_r": 1253,
"speed_w": 5010,
"iops_w": 1252,
"speed_rw": 10025,
"iops_rw": 2505,
"speed_units": "KBps"
},
{
"bs": "64k",
"speed_r": 156081,
"iops_r": 2438,
"speed_w": 156902,
"iops_w": 2451,
"speed_rw": 312983,
"iops_rw": 4889,
"speed_units": "KBps"
},
{
"bs": "512k",
"speed_r": 85347,
"iops_r": 166,
"speed_w": 89882,
"iops_w": 175,
"speed_rw": 175229,
"iops_rw": 341,
"speed_units": "KBps"
},
{
"bs": "1m",
"speed_r": 102456,
"iops_r": 100,
"speed_w": 109280,
"iops_w": 106,
"speed_rw": 211736,
"iops_rw": 206,
"speed_units": "KBps"
}
],
"iperf": [
{
"mode": "IPv4",
"provider": "Clouvider",
"loc": "London, UK (10G)",
"send": "26.1 Mbits/sec",
"recv": "28.5 Mbits/sec",
"latency": "--"
},
{
"mode": "IPv4",
"provider": "Eranium",
"loc": "Amsterdam, NL (100G)",
"send": "31.1 Mbits/sec",
"recv": "27.8 Mbits/sec",
"latency": "--"
},
{
"mode": "IPv4",
"provider": "Uztelecom",
"loc": "Tashkent, UZ (10G)",
"send": "busy ",
"recv": "27.0 Mbits/sec",
"latency": "--"
},
{
"mode": "IPv4",
"provider": "Leaseweb",
"loc": "Singapore, SG (10G)",
"send": "33.0 Mbits/sec",
"recv": "30.6 Mbits/sec",
"latency": "--"
},
{
"mode": "IPv4",
"provider": "Clouvider",
"loc": "Los Angeles, CA, US (10G)",
"send": "27.4 Mbits/sec",
"recv": "26.5 Mbits/sec",
"latency": "--"
},
{
"mode": "IPv4",
"provider": "Leaseweb",
"loc": "NYC, NY, US (10G)",
"send": "28.4 Mbits/sec",
"recv": "26.2 Mbits/sec",
"latency": "--"
},
{
"mode": "IPv4",
"provider": "Edgoo",
"loc": "Sao Paulo, BR (1G)",
"send": "27.4 Mbits/sec",
"recv": "24.3 Mbits/sec",
"latency": "--"
}
],
"geekbench": [],
"runtime": {
"start": 1772973152,
"end": 1772973652,
"elapsed": 500
}
}
The scale in the charts between 0 and 100 represents the performance of this server for each metric relative to the performance of all other servers tested recently at VPSBenchmarks for that same metric.
This Fio test evaluates disk performance in 4 random read and write runs with different block sizes, 50% reads and 50% writes.
All fio tests below run in asynchronous direct mode using libaio and use 2 execution threads regardless of the size of the server.
| 4k | 64k | 512k | 1m | |
|---|---|---|---|---|
| Read | 5.0 MB/s 1.253k IOPS | 156.1 MB/s 2.438k IOPS | 85.3 MB/s 0.166k IOPS | 102.5 MB/s 0.1k IOPS |
| Write | 5.0 MB/s 1.252k IOPS | 156.9 MB/s 2.451k IOPS | 89.9 MB/s 0.175k IOPS | 109.3 MB/s 0.106k IOPS |
| Total | 10.0 MB/s 2.505k IOPS | 313.0 MB/s 4.889k IOPS | 175.2 MB/s 0.341k IOPS | 211.7 MB/s 0.206k IOPS |
Iperf3 tests download and upload speeds to various locations using 8 parallel threads.
| Download | Upload | |
|---|---|---|
|
Edgoo Sao Paulo, BR (1G) |
24 Mbits/sec | 27 Mbits/sec |
|
Clouvider London, UK (10G) |
29 Mbits/sec | 26 Mbits/sec |
|
Leaseweb NYC, NY, US (10G) |
26 Mbits/sec | 28 Mbits/sec |
|
Eranium Amsterdam, NL (100G) |
28 Mbits/sec | 31 Mbits/sec |
|
Leaseweb Singapore, SG (10G) |
31 Mbits/sec | 33 Mbits/sec |
|
Uztelecom Tashkent, UZ (10G) |
27 Mbits/sec | busy |
|
Clouvider Los Angeles, CA, US (10G) |
27 Mbits/sec | 27 Mbits/sec |