netcup - VPS piko G11.5s Yab
October 18th 2026
This is the yab (yabs.sh results) for tests that were run on a netcup server on October 18th 2026.
yabs.sh is an easy to run and powerful script that runs a full set of benchmarks on your server. Get Started with Yabs. You can collect, organize and visualize your yabs for free at VPSBenchmarks.
Go to your Dashboard to manage your yabs.
Compare Geekbench, Fio and Iperf3 benchmark results from the Yabs comparison page.
netcup Coupons
Code: 6874nc179114661214
Value: 42€
2 months free on the RS 1000 G12.5 root server plan powered by 4 AMD EPYC™ 9645 cores with 8GB RAM.
The voucher can be redeemed at the following URL:
https://www.netcup.com/en/checkout/cart
New customers only.
Code: 6877nc179114717217
Value: 14.01€
One month off on the VPS 1000 G12.5: 4 vCore (x86), 8GB RAM, 128GB SSD.
New customers only.
The vouchers can be redeemed at the following URL:
https://www.netcup.com/en/checkout/cart
Code: 6875nc17911467253
Value: 39.33€
1 month free on the RS 2000 G12.5 root server plan powered by 8 AMD EPYC™ 9645 cores with 16GB RAM.
The voucher can be redeemed at the following URL:
https://www.netcup.com/en/checkout/cart
New customers only.
Code: 36nc17790641640
Value: 5€
5€ rebate on any order excluding domains.
The voucher can be redeemed at the following URL:
https://www.netcup.com/en/checkout/cart
New customers only.
Server
| Provider | netcup |
|---|---|
| VPS Plan | VPS piko G11.5s |
| OS Version | Debian GNU/Linux 13 (trixie) |
| Data Center Location | Nuremberg, Bavaria, Germany |
Specs
| Processor | QEMU Virtual CPU version 2.5+ |
|---|---|
| CPU cores | 1 @ 2294.608 MHz |
| RAM | 963.4 MiB |
| Disk | 30.8 GB |
| Swap | 0.0 B |
| Kernel | 6.12.113+deb13-amd64 |
| AES-NI | ✔ Enabled |
| VM-x/AMD-V | ❌ Disabled |
| VM Type |
Raw Yabs.sh Output
{
"version": "v2026-10-07",
"time": "20261018-210709",
"os": {
"arch": "x64",
"distro": "Debian GNU/Linux 13 (trixie)",
"kernel": "6.12.113+deb13-amd64",
"uptime": 166547.71,
"vm": "KVM"
},
"net": {
"ipv4": true,
"ipv6": true
},
"cpu": {
"model": "QEMU Virtual CPU version 2.5+",
"cores": 1,
"freq": "2294.608 MHz",
"aes": true,
"virt": false
},
"mem": {
"ram": 986476,
"ram_units": "KiB",
"swap": 0,
"swap_units": "KiB",
"disk": 30834915,
"disk_units": "KB"
},
"ip_info": {
"protocol": "IPv6",
"isp": "netcup GmbH",
"asn": "AS197540 netcup GmbH",
"org": "NETCUP-GMBH",
"city": "Nuremberg",
"region": "Bavaria",
"region_code": "BY",
"country": "Germany"
},
"partition": "/dev/vda3",
"fio": [
{
"bs": "4k",
"speed_r": 62596,
"iops_r": 15649,
"speed_w": 62711,
"iops_w": 15677,
"speed_rw": 125307,
"iops_rw": 31326,
"speed_units": "KBps"
},
{
"bs": "64k",
"speed_r": 655894,
"iops_r": 10248,
"speed_w": 659346,
"iops_w": 10302,
"speed_rw": 1315240,
"iops_rw": 20550,
"speed_units": "KBps"
},
{
"bs": "512k",
"speed_r": 722120,
"iops_r": 1410,
"speed_w": 760489,
"iops_w": 1485,
"speed_rw": 1482609,
"iops_rw": 2895,
"speed_units": "KBps"
},
{
"bs": "1m",
"speed_r": 771698,
"iops_r": 753,
"speed_w": 823093,
"iops_w": 803,
"speed_rw": 1594791,
"iops_rw": 1556,
"speed_units": "KBps"
}
],
"iperf": [
{
"mode": "IPv4",
"provider": "Clouvider",
"loc": "London, UK (10G)",
"send": "1.08 Gbits/sec",
"recv": "684 Mbits/sec",
"latency": "28.2 ms"
},
{
"mode": "IPv4",
"provider": "Eranium",
"loc": "Amsterdam, NL (100G)",
"send": "1.09 Gbits/sec",
"recv": "942 Mbits/sec",
"latency": "16.7 ms"
},
{
"mode": "IPv4",
"provider": "Uztelecom",
"loc": "Tashkent, UZ (10G)",
"send": "1.05 Gbits/sec",
"recv": "847 Mbits/sec",
"latency": "74.5 ms"
},
{
"mode": "IPv4",
"provider": "Leaseweb",
"loc": "Singapore, SG (10G)",
"send": "963 Mbits/sec",
"recv": "741 Mbits/sec",
"latency": "160 ms"
},
{
"mode": "IPv4",
"provider": "Clouvider",
"loc": "Los Angeles, CA, US (10G)",
"send": "950 Mbits/sec",
"recv": "127 Mbits/sec",
"latency": "161 ms"
},
{
"mode": "IPv4",
"provider": "Leaseweb",
"loc": "NYC, NY, US (10G)",
"send": "1.00 Gbits/sec",
"recv": "749 Mbits/sec",
"latency": "94.3 ms"
},
{
"mode": "IPv4",
"provider": "Edgoo",
"loc": "Sao Paulo, BR (1G)",
"send": "busy ",
"recv": "busy ",
"latency": "203 ms"
},
{
"mode": "IPv6",
"provider": "Clouvider",
"loc": "London, UK (10G)",
"send": "1.07 Gbits/sec",
"recv": "927 Mbits/sec",
"latency": "21.0 ms"
},
{
"mode": "IPv6",
"provider": "Eranium",
"loc": "Amsterdam, NL (100G)",
"send": "1.08 Gbits/sec",
"recv": "930 Mbits/sec",
"latency": "17.3 ms"
},
{
"mode": "IPv6",
"provider": "Uztelecom",
"loc": "Tashkent, UZ (10G)",
"send": "1.03 Gbits/sec",
"recv": "817 Mbits/sec",
"latency": "71.2 ms"
},
{
"mode": "IPv6",
"provider": "Leaseweb",
"loc": "Singapore, SG (10G)",
"send": "864 Mbits/sec",
"recv": "806 Mbits/sec",
"latency": "162 ms"
},
{
"mode": "IPv6",
"provider": "Clouvider",
"loc": "Los Angeles, CA, US (10G)",
"send": "849 Mbits/sec",
"recv": "174 Mbits/sec",
"latency": "166 ms"
},
{
"mode": "IPv6",
"provider": "Leaseweb",
"loc": "NYC, NY, US (10G)",
"send": "1.01 Gbits/sec",
"recv": "800 Mbits/sec",
"latency": "94.9 ms"
},
{
"mode": "IPv6",
"provider": "Edgoo",
"loc": "Sao Paulo, BR (1G)",
"send": "busy ",
"recv": "busy ",
"latency": "203 ms"
}
],
"geekbench": [],
"runtime": {
"start": 1792350429,
"end": 1792350823,
"elapsed": 394
}
}
Results Summary
The scale in the charts between 0 and 100 represents the performance of this server for each metric relative to the performance of all other servers tested recently at VPSBenchmarks for that same metric.
- 100 means the server is the fastest for this metric.
- 50 means the server has exactly median performance for this metric.
- 0 means the server is the slowest for this metric.
Fio
This Fio test evaluates disk performance in 4 random read and write runs with different block sizes, 50% reads and 50% writes.
All fio tests below run in asynchronous direct mode using libaio and use 2 execution threads regardless of the size of the server.
| 4k | 64k | 512k | 1m | |
|---|---|---|---|---|
| Read | 62.6 MB/s 15.649k IOPS | 655.9 MB/s 10.248k IOPS | 722.1 MB/s 1.41k IOPS | 771.7 MB/s 0.753k IOPS |
| Write | 62.7 MB/s 15.677k IOPS | 659.3 MB/s 10.302k IOPS | 760.5 MB/s 1.485k IOPS | 823.1 MB/s 0.803k IOPS |
| Total | 125.3 MB/s 31.326k IOPS | 1315.2 MB/s 20.55k IOPS | 1482.6 MB/s 2.895k IOPS | 1594.8 MB/s 1.556k IOPS |
Iperf3 ipv4
Iperf3 tests download and upload speeds to various locations using 8 parallel threads.
| Download | Upload | |
|---|---|---|
|
Edgoo Sao Paulo, BR (1G) |
busy | busy |
|
Clouvider London, UK (10G) |
684 Mbits/sec | 1106 Mbits/sec |
|
Leaseweb NYC, NY, US (10G) |
749 Mbits/sec | 1024 Mbits/sec |
|
Eranium Amsterdam, NL (100G) |
942 Mbits/sec | 1116 Mbits/sec |
|
Leaseweb Singapore, SG (10G) |
741 Mbits/sec | 963 Mbits/sec |
|
Uztelecom Tashkent, UZ (10G) |
847 Mbits/sec | 1075 Mbits/sec |
|
Clouvider Los Angeles, CA, US (10G) |
127 Mbits/sec | 950 Mbits/sec |
Iperf3 ipv6
Iperf3 tests download and upload speeds to various locations using 8 parallel threads.
| Download | Upload | |
|---|---|---|
|
Edgoo Sao Paulo, BR (1G) |
busy | busy |
|
Clouvider London, UK (10G) |
927 Mbits/sec | 1096 Mbits/sec |
|
Leaseweb NYC, NY, US (10G) |
800 Mbits/sec | 1034 Mbits/sec |
|
Eranium Amsterdam, NL (100G) |
930 Mbits/sec | 1106 Mbits/sec |
|
Leaseweb Singapore, SG (10G) |
806 Mbits/sec | 864 Mbits/sec |
|
Uztelecom Tashkent, UZ (10G) |
817 Mbits/sec | 1055 Mbits/sec |
|
Clouvider Los Angeles, CA, US (10G) |
174 Mbits/sec | 849 Mbits/sec |