Servers.com - SSD.30 Yab
June 30th 2025
This is the yab (yabs.sh results) for tests that were run on a Servers.com server on June 30th 2025.
yabs.sh is an easy to run and powerful script that runs a full set of benchmarks on your server. Get Started with Yabs. You can collect, organize and visualize your yabs for free at VPSBenchmarks.
Go to your Dashboard to manage your yabs.
Compare Geekbench, Fio and Iperf3 benchmark results from the Yabs comparison page.
Server
| Provider | Servers.com |
|---|---|
| VPS Plan | SSD.30 |
| OS Version | Debian GNU/Linux 12 (bookworm) |
| Data Center Location | San Jose, California, United States |
Specs
| Processor | Intel Xeon Processor (Skylake, IBRS) |
|---|---|
| CPU cores | 1 @ 2194.842 MHz |
| RAM | 960.7 MiB |
| Disk | 29.5 GB |
| Swap | 0.0 B |
| Kernel | 6.1.0-28-amd64 |
| AES-NI | ✔ Enabled |
| VM-x/AMD-V | ✔ Enabled |
| VM Type |
Raw Yabs.sh Output
{
"version": "v2025-04-20",
"time": "20250630-233355",
"os": {
"arch": "x64",
"distro": "Debian GNU/Linux 12 (bookworm)",
"kernel": "6.1.0-28-amd64",
"uptime": 15159834.82,
"vm": "KVM"
},
"net": {
"ipv4": true,
"ipv6": false
},
"cpu": {
"model": "Intel Xeon Processor (Skylake, IBRS)",
"cores": 1,
"freq": "2194.842 MHz",
"aes": true,
"virt": true
},
"mem": {
"ram": 983760,
"ram_units": "KiB",
"swap": 0,
"swap_units": "KiB",
"disk": 29456328,
"disk_units": "KB"
},
"ip_info": {
"protocol": "IPv4",
"isp": "Servers.com, Inc.",
"asn": "AS7979 Servers.com, Inc.",
"org": "Servers.com, Inc",
"city": "San Jose",
"region": "California",
"region_code": "CA",
"country": "United States"
},
"partition": "/dev/vda1",
"fio": [
{
"bs": "4k",
"speed_r": 16021,
"iops_r": 4005,
"speed_w": 16054,
"iops_w": 4013,
"speed_rw": 32075,
"iops_rw": 8018,
"speed_units": "KBps"
},
{
"bs": "64k",
"speed_r": 154183,
"iops_r": 2409,
"speed_w": 154994,
"iops_w": 2421,
"speed_rw": 309177,
"iops_rw": 4830,
"speed_units": "KBps"
},
{
"bs": "512k",
"speed_r": 150866,
"iops_r": 294,
"speed_w": 158882,
"iops_w": 310,
"speed_rw": 309748,
"iops_rw": 604,
"speed_units": "KBps"
},
{
"bs": "1m",
"speed_r": 149761,
"iops_r": 146,
"speed_w": 159735,
"iops_w": 155,
"speed_rw": 309496,
"iops_rw": 301,
"speed_units": "KBps"
}
],
"iperf": [
{
"mode": "IPv4",
"provider": "Clouvider",
"loc": "London, UK (10G)",
"send": "1.28 Gbits/sec",
"recv": "1.06 Gbits/sec",
"latency": "138 ms"
},
{
"mode": "IPv4",
"provider": "Eranium",
"loc": "Amsterdam, NL (100G)",
"send": "8.32 Gbits/sec",
"recv": "5.23 Gbits/sec",
"latency": "140 ms"
},
{
"mode": "IPv4",
"provider": "Uztelecom",
"loc": "Tashkent, UZ (10G)",
"send": "3.54 Gbits/sec",
"recv": "2.07 Gbits/sec",
"latency": "232 ms"
},
{
"mode": "IPv4",
"provider": "Leaseweb",
"loc": "Singapore, SG (10G)",
"send": "1.33 Gbits/sec",
"recv": "567 Mbits/sec",
"latency": "243 ms"
},
{
"mode": "IPv4",
"provider": "Clouvider",
"loc": "Los Angeles, CA, US (10G)",
"send": "5.90 Gbits/sec",
"recv": "5.49 Gbits/sec",
"latency": "7.84 ms"
},
{
"mode": "IPv4",
"provider": "Leaseweb",
"loc": "NYC, NY, US (10G)",
"send": "2.68 Gbits/sec",
"recv": "7.24 Gbits/sec",
"latency": "62.0 ms"
},
{
"mode": "IPv4",
"provider": "Edgoo",
"loc": "Sao Paulo, BR (1G)",
"send": "3.51 Gbits/sec",
"recv": "4.43 Mbits/sec",
"latency": "171 ms"
}
],
"geekbench": [],
"runtime": {
"start": 1751326435,
"end": 1751326729,
"elapsed": 294
}
}
Results Summary
The scale in the charts between 0 and 100 represents the performance of this server for each metric relative to the performance of all other servers tested recently at VPSBenchmarks for that same metric.
- 100 means the server is the fastest for this metric.
- 50 means the server has exactly median performance for this metric.
- 0 means the server is the slowest for this metric.
Fio
This Fio test evaluates disk performance in 4 random read and write runs with different block sizes, 50% reads and 50% writes.
All fio tests below run in asynchronous direct mode using libaio and use 2 execution threads regardless of the size of the server.
| 4k | 64k | 512k | 1m | |
|---|---|---|---|---|
| Read | 16.0 MB/s 4.005k IOPS | 154.2 MB/s 2.409k IOPS | 150.9 MB/s 0.294k IOPS | 149.8 MB/s 0.146k IOPS |
| Write | 16.1 MB/s 4.013k IOPS | 155.0 MB/s 2.421k IOPS | 158.9 MB/s 0.31k IOPS | 159.7 MB/s 0.155k IOPS |
| Total | 32.1 MB/s 8.018k IOPS | 309.2 MB/s 4.83k IOPS | 309.7 MB/s 0.604k IOPS | 309.5 MB/s 0.301k IOPS |
Iperf3 ipv4
Iperf3 tests download and upload speeds to various locations using 8 parallel threads.
| Download | Upload | |
|---|---|---|
|
Edgoo Sao Paulo, BR (1G) |
4 Mbits/sec | 3594 Mbits/sec |
|
Clouvider London, UK (10G) |
1085 Mbits/sec | 1311 Mbits/sec |
|
Leaseweb NYC, NY, US (10G) |
7414 Mbits/sec | 2744 Mbits/sec |
|
Eranium Amsterdam, NL (100G) |
5356 Mbits/sec | 8520 Mbits/sec |
|
Leaseweb Singapore, SG (10G) |
567 Mbits/sec | 1362 Mbits/sec |
|
Uztelecom Tashkent, UZ (10G) |
2120 Mbits/sec | 3625 Mbits/sec |
|
Clouvider Los Angeles, CA, US (10G) |
5622 Mbits/sec | 6042 Mbits/sec |