AWS EC2 (us-east-1) (Amazon AWS) - grokbot Yab
September 1st 2026
This is the yab (yabs.sh results) for tests that were run on a AWS EC2 (us-east-1) (Amazon AWS) server on September 1st 2026.
yabs.sh is an easy to run and powerful script that runs a full set of benchmarks on your server. Get Started with Yabs. You can collect, organize and visualize your yabs for free at VPSBenchmarks.
Go to your Dashboard to manage your yabs.
Compare Geekbench, Fio and Iperf3 benchmark results from the Yabs comparison page.
Server
| Provider | AWS EC2 (us-east-1) (Amazon AWS) |
|---|---|
| VPS Plan | grokbot |
| OS Version | Debian GNU/Linux 13 (trixie) |
| Data Center Location | Ashburn, Virginia, United States |
Specs
| Processor | Intel(R) Xeon(R) Processor |
|---|---|
| CPU cores | 8 @ 2400.000 MHz |
| RAM | 15.6 GiB |
| Disk | 132.0 GB |
| Swap | 0.0 B |
| Kernel | 6.12.94+ |
| AES-NI | ✔ Enabled |
| VM-x/AMD-V | ✔ Enabled |
| VM Type |
Raw Yabs.sh Output
{
"version": "v2026-07-24",
"time": "20260901-223944",
"os": {
"arch": "x64",
"distro": "Debian GNU/Linux 13 (trixie)",
"kernel": "6.12.94+",
"uptime": 2154.39,
"vm": "DOCKER"
},
"net": {
"ipv4": true,
"ipv6": false
},
"cpu": {
"model": "Intel(R) Xeon(R) Processor",
"cores": 8,
"freq": "2400.000 MHz",
"aes": true,
"virt": true
},
"mem": {
"ram": 16397684,
"ram_units": "KiB",
"swap": 0,
"swap_units": "KiB",
"disk": 131985348,
"disk_units": "KB"
},
"ip_info": {
"protocol": "IPv4",
"isp": "Amazon.com, Inc.",
"asn": "AS14618 Amazon.com, Inc.",
"org": "AWS EC2 (us-east-1)",
"city": "Ashburn",
"region": "Virginia",
"region_code": "VA",
"country": "United States"
},
"partition": "overlay",
"fio": [
{
"bs": "4k",
"speed_r": 833753,
"iops_r": 208438,
"speed_w": 835953,
"iops_w": 208988,
"speed_rw": 1669706,
"iops_rw": 417426,
"speed_units": "KBps"
},
{
"bs": "64k",
"speed_r": 1008995,
"iops_r": 15765,
"speed_w": 1014305,
"iops_w": 15848,
"speed_rw": 2023300,
"iops_rw": 31613,
"speed_units": "KBps"
},
{
"bs": "512k",
"speed_r": 2254834,
"iops_r": 4403,
"speed_w": 2374640,
"iops_w": 4637,
"speed_rw": 4629474,
"iops_rw": 9040,
"speed_units": "KBps"
},
{
"bs": "1m",
"speed_r": 1688492,
"iops_r": 1648,
"speed_w": 1800945,
"iops_w": 1758,
"speed_rw": 3489437,
"iops_rw": 3406,
"speed_units": "KBps"
}
],
"iperf": [
{
"mode": "IPv4",
"provider": "Clouvider",
"loc": "London, UK (10G)",
"send": "1.88 Gbits/sec",
"recv": "2.31 Gbits/sec",
"latency": "--"
},
{
"mode": "IPv4",
"provider": "Eranium",
"loc": "Amsterdam, NL (100G)",
"send": "1.67 Gbits/sec",
"recv": "673 Mbits/sec",
"latency": "--"
},
{
"mode": "IPv4",
"provider": "Uztelecom",
"loc": "Tashkent, UZ (10G)",
"send": "953 Mbits/sec",
"recv": "1.12 Gbits/sec",
"latency": "--"
},
{
"mode": "IPv4",
"provider": "Leaseweb",
"loc": "Singapore, SG (10G)",
"send": "703 Mbits/sec",
"recv": "629 Mbits/sec",
"latency": "--"
},
{
"mode": "IPv4",
"provider": "Clouvider",
"loc": "Los Angeles, CA, US (10G)",
"send": "3.07 Gbits/sec",
"recv": "3.08 Gbits/sec",
"latency": "--"
},
{
"mode": "IPv4",
"provider": "Leaseweb",
"loc": "NYC, NY, US (10G)",
"send": "9.27 Gbits/sec",
"recv": "6.72 Gbits/sec",
"latency": "--"
},
{
"mode": "IPv4",
"provider": "Edgoo",
"loc": "Sao Paulo, BR (1G)",
"send": "1.39 Gbits/sec",
"recv": "busy ",
"latency": "--"
}
],
"geekbench": [],
"runtime": {
"start": 1788302384,
"end": 1788303183,
"elapsed": 799
}
}
Results Summary
The scale in the charts between 0 and 100 represents the performance of this server for each metric relative to the performance of all other servers tested recently at VPSBenchmarks for that same metric.
- 100 means the server is the fastest for this metric.
- 50 means the server has exactly median performance for this metric.
- 0 means the server is the slowest for this metric.
Fio
This Fio test evaluates disk performance in 4 random read and write runs with different block sizes, 50% reads and 50% writes.
All fio tests below run in asynchronous direct mode using libaio and use 2 execution threads regardless of the size of the server.
| 4k | 64k | 512k | 1m | |
|---|---|---|---|---|
| Read | 833.8 MB/s 208.438k IOPS | 1009.0 MB/s 15.765k IOPS | 2254.8 MB/s 4.403k IOPS | 1688.5 MB/s 1.648k IOPS |
| Write | 836.0 MB/s 208.988k IOPS | 1014.3 MB/s 15.848k IOPS | 2374.6 MB/s 4.637k IOPS | 1800.9 MB/s 1.758k IOPS |
| Total | 1669.7 MB/s 417.426k IOPS | 2023.3 MB/s 31.613k IOPS | 4629.5 MB/s 9.04k IOPS | 3489.4 MB/s 3.406k IOPS |
Iperf3 ipv4
Iperf3 tests download and upload speeds to various locations using 8 parallel threads.
| Download | Upload | |
|---|---|---|
|
Edgoo Sao Paulo, BR (1G) |
busy | 1423 Mbits/sec |
|
Clouvider London, UK (10G) |
2365 Mbits/sec | 1925 Mbits/sec |
|
Leaseweb NYC, NY, US (10G) |
6881 Mbits/sec | 9492 Mbits/sec |
|
Eranium Amsterdam, NL (100G) |
673 Mbits/sec | 1710 Mbits/sec |
|
Leaseweb Singapore, SG (10G) |
629 Mbits/sec | 703 Mbits/sec |
|
Uztelecom Tashkent, UZ (10G) |
1147 Mbits/sec | 953 Mbits/sec |
|
Clouvider Los Angeles, CA, US (10G) |
3154 Mbits/sec | 3144 Mbits/sec |