This is the yab (yabs.sh results) for tests that were run on a OVHcloud server on January 8th 2026.
yabs.sh is an easy to run and powerful script that runs a full set of benchmarks on your server. Get Started with Yabs. You can collect, organize and visualize your yabs for free at VPSBenchmarks.
Go to your Dashboard to manage your yabs.
Compare Geekbench, Fio and Iperf3 benchmark results from the Yabs comparison page.
| Provider | OVHcloud |
|---|---|
| VPS Plan | ovhh |
| OS Version | CloudLinux 9.7 (Pavel Popovich) |
| Data Center Location | Singapore, North West, Singapore |
| Processor | Intel Core Processor (Haswell, no TSX) |
|---|---|
| CPU cores | 12 @ 2399.996 MHz |
| RAM | 45.7 GiB |
| Disk | 318.5 GB |
| Swap | 0.0 B |
| Kernel | 5.14.0-611.16.1.el9_7.x86_64 |
| AES-NI | ✔ Enabled |
| VM-x/AMD-V | ✔ Enabled |
| VM Type |
{
"version": "v2025-04-20",
"time": "20260108-151903",
"os": {
"arch": "x64",
"distro": "CloudLinux 9.7 (Pavel Popovich)",
"kernel": "5.14.0-611.16.1.el9_7.x86_64",
"uptime": 84360.42,
"vm": "KVM"
},
"net": {
"ipv4": true,
"ipv6": true
},
"cpu": {
"model": "Intel Core Processor (Haswell, no TSX)",
"cores": 12,
"freq": "2399.996 MHz",
"aes": true,
"virt": true
},
"mem": {
"ram": 47903300,
"ram_units": "KiB",
"swap": 0,
"swap_units": "KiB",
"disk": 318494192,
"disk_units": "KB"
},
"ip_info": {
"protocol": "IPv6",
"isp": "OVH SAS",
"asn": "AS16276 OVH SAS",
"org": "OVH",
"city": "Singapore",
"region": "North West",
"region_code": "03",
"country": "Singapore"
},
"partition": "/dev/sda4",
"fio": [
{
"bs": "4k",
"speed_r": 505,
"iops_r": 126,
"speed_w": 528,
"iops_w": 132,
"speed_rw": 1033,
"iops_rw": 258,
"speed_units": "KBps"
},
{
"bs": "64k",
"speed_r": 504,
"iops_r": 7,
"speed_w": 533,
"iops_w": 8,
"speed_rw": 1037,
"iops_rw": 15,
"speed_units": "KBps"
},
{
"bs": "512k",
"speed_r": 444,
"iops_r": 0,
"speed_w": 588,
"iops_w": 1,
"speed_rw": 1032,
"iops_rw": 1,
"speed_units": "KBps"
},
{
"bs": "1m",
"speed_r": 448,
"iops_r": 0,
"speed_w": 588,
"iops_w": 0,
"speed_rw": 1036,
"iops_rw": 0,
"speed_units": "KBps"
}
],
"iperf": [
{
"mode": "IPv4",
"provider": "Clouvider",
"loc": "London, UK (10G)",
"send": "1.03 Gbits/sec",
"recv": "717 Mbits/sec",
"latency": "167 ms"
},
{
"mode": "IPv4",
"provider": "Eranium",
"loc": "Amsterdam, NL (100G)",
"send": "938 Mbits/sec",
"recv": "930 Mbits/sec",
"latency": "231 ms"
},
{
"mode": "IPv4",
"provider": "Uztelecom",
"loc": "Tashkent, UZ (10G)",
"send": "159 Mbits/sec",
"recv": "651 Mbits/sec",
"latency": "280 ms"
},
{
"mode": "IPv4",
"provider": "Leaseweb",
"loc": "Singapore, SG (10G)",
"send": "1.96 Gbits/sec",
"recv": "1.96 Gbits/sec",
"latency": "2.87 ms"
},
{
"mode": "IPv4",
"provider": "Clouvider",
"loc": "Los Angeles, CA, US (10G)",
"send": "busy ",
"recv": "1.27 Mbits/sec",
"latency": "578 ms"
},
{
"mode": "IPv4",
"provider": "Leaseweb",
"loc": "NYC, NY, US (10G)",
"send": "594 Mbits/sec",
"recv": "busy ",
"latency": "230 ms"
},
{
"mode": "IPv4",
"provider": "Edgoo",
"loc": "Sao Paulo, BR (1G)",
"send": "473 Mbits/sec",
"recv": "399 Mbits/sec",
"latency": "330 ms"
},
{
"mode": "IPv6",
"provider": "Clouvider",
"loc": "London, UK (10G)",
"send": "1.01 Gbits/sec",
"recv": "busy ",
"latency": "167 ms"
},
{
"mode": "IPv6",
"provider": "Eranium",
"loc": "Amsterdam, NL (100G)",
"send": "807 Mbits/sec",
"recv": "898 Mbits/sec",
"latency": "230 ms"
},
{
"mode": "IPv6",
"provider": "Uztelecom",
"loc": "Tashkent, UZ (10G)",
"send": "busy ",
"recv": "512 Mbits/sec",
"latency": "291 ms"
},
{
"mode": "IPv6",
"provider": "Leaseweb",
"loc": "Singapore, SG (10G)",
"send": "1.93 Gbits/sec",
"recv": "1.93 Gbits/sec",
"latency": "13.4 ms"
},
{
"mode": "IPv6",
"provider": "Clouvider",
"loc": "Los Angeles, CA, US (10G)",
"send": "busy ",
"recv": "401 Kbits/sec",
"latency": "--"
},
{
"mode": "IPv6",
"provider": "Leaseweb",
"loc": "NYC, NY, US (10G)",
"send": "794 Mbits/sec",
"recv": "829 Mbits/sec",
"latency": "--"
},
{
"mode": "IPv6",
"provider": "Edgoo",
"loc": "Sao Paulo, BR (1G)",
"send": "busy ",
"recv": "363 Mbits/sec",
"latency": "330 ms"
}
],
"geekbench": [],
"runtime": {
"start": 1767885543,
"end": 1767889095,
"elapsed": 3552
}
}
The scale in the charts between 0 and 100 represents the performance of this server for each metric relative to the performance of all other servers tested recently at VPSBenchmarks for that same metric.
This Fio test evaluates disk performance in 4 random read and write runs with different block sizes, 50% reads and 50% writes.
All fio tests below run in asynchronous direct mode using libaio and use 2 execution threads regardless of the size of the server.
| 4k | 64k | 512k | 1m | |
|---|---|---|---|---|
| Read | 0.5 MB/s 0.126k IOPS | 0.5 MB/s 0.007k IOPS | 0.4 MB/s 0k IOPS | 0.4 MB/s 0k IOPS |
| Write | 0.5 MB/s 0.132k IOPS | 0.5 MB/s 0.008k IOPS | 0.6 MB/s 0.001k IOPS | 0.6 MB/s 0k IOPS |
| Total | 1.0 MB/s 0.258k IOPS | 1.0 MB/s 0.015k IOPS | 1.0 MB/s 0.001k IOPS | 1.0 MB/s 0k IOPS |
Iperf3 tests download and upload speeds to various locations using 8 parallel threads.
| Download | Upload | |
|---|---|---|
|
Edgoo Sao Paulo, BR (1G) |
399 Mbits/sec | 473 Mbits/sec |
|
Clouvider London, UK (10G) |
717 Mbits/sec | 1055 Mbits/sec |
|
Leaseweb NYC, NY, US (10G) |
busy | 594 Mbits/sec |
|
Eranium Amsterdam, NL (100G) |
930 Mbits/sec | 938 Mbits/sec |
|
Leaseweb Singapore, SG (10G) |
2007 Mbits/sec | 2007 Mbits/sec |
|
Uztelecom Tashkent, UZ (10G) |
651 Mbits/sec | 159 Mbits/sec |
|
Clouvider Los Angeles, CA, US (10G) |
1 Mbits/sec | busy |
Iperf3 tests download and upload speeds to various locations using 8 parallel threads.
| Download | Upload | |
|---|---|---|
|
Edgoo Sao Paulo, BR (1G) |
363 Mbits/sec | busy |
|
Clouvider London, UK (10G) |
busy | 1034 Mbits/sec |
|
Leaseweb NYC, NY, US (10G) |
829 Mbits/sec | 794 Mbits/sec |
|
Eranium Amsterdam, NL (100G) |
898 Mbits/sec | 807 Mbits/sec |
|
Leaseweb Singapore, SG (10G) |
1976 Mbits/sec | 1976 Mbits/sec |
|
Uztelecom Tashkent, UZ (10G) |
512 Mbits/sec | busy |
|
Clouvider Los Angeles, CA, US (10G) |
0 Mbits/sec | busy |